Modifying your VM

Modify your VM using the Anka Virtualization CLI

Prerequisites

  1. You’ve installed the Anka Virtualization package.
  2. You’ve created your first VM.

The rest of this Getting Started guide focuses heavily on the (Command-Line Interface). These will be performed from within your macOS Terminal. For all available CLI commands, flags, and options, see the Command Reference.
> anka modify --help
usage: modify vmid <command>

   Modify a VM parameters

arguments:
  vmid                     Virtual machine to modify

commands:
  add                      Add new items to a VM configuration
  delete                   Remove items from a VM configuration
  name                     Set new name for the VM
  cpu                      Set number of vcpu cores and frequency
  ram                      Set RAM size and parameters
  network                  Modify network card settings
  port                     Add port forwarding rule
  disk                     Modify hard drive settings
  display                  Configure displays
  label                    Assign labels to a VM in key/value form

Over time, this information may become out of date. The goal is to provide you with an idea of the CPU and RAM to set for VMs depending on the amount you wish to run. Note that Apple does not permit more than 2 VMs per machine (this is only a strict limitation on ARM machines currently).

Intel

To calculate the cores available for VMs, you’ll take the number of physical cores and then multiply it by 2. Once you have the total virtual cores, you can assign all of them (maybe - 1 or 2 CPUs to give the host breathing room) if you plan to run a single VM on the host. Otherwise, if you want to run two VMs at once, you’ll divide the total virtual cores by 2 and then assign this number to the VM Template. RAM follows a similar pattern, giving 2GB for the host: totalRAMGB - 2GB and (totalRAMGB / 2) - 2GB.

ARM

Things are similar with slightly different CPUs calculations due to the different CPU types:

Apple/ARM1 VM2 VMs
Mac Mini, M1/M2
8-core
CPUs: 6 or 8-cores
RAM: totalRAMGB - 2GB
CPUs: 4-cores
RAM: (totalRAMGB / 2) - 2GB
Mac Mini, M2 Pro
10-core
CPUs: 8 or 10-cores
RAM: totalRAMGB - 2GB
CPUs: 6-cores
RAM: (totalRAMGB / 2) - 2GB
Mac Mini, M2 Pro
12-core
CPUs: 10 or 12-cores
RAM: totalRAMGB - 2GB
CPUs: 8-cores
RAM: (totalRAMGB / 2) - 2GB
Mac Studio, M2 Max
12-core
CPUs: 10 or 12-cores
RAM: totalRAMGB - 2GB (max of 60GB)
CPUs: 8-cores
RAM: (totalRAMGB / 2) - 2GB (max of 60GB)
Mac Studio, M2 Ultra
24-core
CPUs: 10 or 12-cores
RAM: totalRAMGB - 2GB (max of 60GB)
CPUs: 10 or 12-cores
RAM: (totalRAMGB / 2) - 2GB (max of 60GB)
Mac Studio, M1 Max, 2022
10-core
CPUs: 8-cores
RAM: totalRAMGB - 2GB (max of 60GB)
CPUs: 6 or 8-cores
RAM: (totalRAMGB / 2) - 2GB (max of 60GB)
Mac Studio, M1 Ultra, 2022
20-core
CPUs: 10-cores
RAM: totalRAMGB - 2GB (max of 60GB)
CPUs: 6 or 8-cores
RAM: (totalRAMGB / 2) - 2GB (max of 60GB)
Due to Ultra using the NUMA architecture, VMs/virtualization will only ever use 8 performance cores at a time.

Common Examples

VM Resources

CPU

> anka modify 14.3.1-arm64 cpu --help
usage: cpu [options] [vcpu]

   Set number of vcpu cores and frequency

arguments:
  vcpu                     Number of vcpu cores

options:
  -c,--cores <val>         Number of vcpu cores
  -f,--frequency <val>     Set the base vcpu frequency (Hz)
❯ anka show 12.6 cpu
+-------+---+
| cores | 4 |
+-------+---+

❯ anka modify 12.6 cpu 5

❯ anka show 12.6 cpu
+-------+---+
| cores | 5 |
+-------+---+

RAM

> anka modify 14.3.1-arm64 ram --help
usage: ram [size]

   Set RAM size and parameters

arguments:
  size                     Size of RAM (supported suffixes: T|G|M|K)
❯ anka show 12.6 ram
+------+------+
| size | 4GiB |
+------+------+

❯ anka modify 12.6 ram 6G

❯ anka show 12.6 ram     
+------+------+
| size | 6GiB |
+------+------+

DISK

> anka modify 14.3.1-arm64 disk --help
usage: disk [options]

   Modify hard drive settings

options:
  -c,--controller <val>    set controller: sata/virtio-blk
  -s,--size <val>          set disk size (supported suffixes: T|G|M|K)
  -f,--file <val>          assign external image or device
  --ro                     mark the image as read-only for the VM
  --rw                     mark the image as writable (default) for the VM
Post-modify, you need to tell disk utility to modify the VM’s disk to consume the new free space: anka run {vmNameOrUUID} sudo diskutil apfs resizeContainer disk0s2 0
It’s currently impossible to downsize a VM’s hard-drive. We suggest creating your initial VM Template with a smaller amount of available disk and then increase in subsequent Tags.

Port forwarding from guest to host

> anka modify 14.3.1-arm64 port --help
usage: port [options] name [rule]

   Add port forwarding rule

arguments:
  name                     Rule name
  rule                     Port forwarding rule: guest-port[:host-ip][:host-port]

options:
  -g,--guest-port <val>    The port inside of the VM that the host-port connects to
  -p,--host-port <val>     The host port to listen on (assigns dynamically if not specified)
  -l,--host-ip <val>       Listen address (defaults to any)
  -d,--delete              Delete the rule
  --set-name <val>         Rename the rule
We do not recommend setting --host-port, as it will cause collisions if two VMs attempt to use the same port. If no --host-port is specified, we will dynamically assign them starting from 10000 and incrementing (10001, 10002, etc) depending on if there are other VMs running and consuming ports from the range already.
❯ anka modify 12.6 port --help
usage: port [options] name [rule]

   Add port forwarding rule

arguments:
  name                     Rule name
  rule                     Port forwarding rule: guest-port[:host-ip][:host-port]

options:
  -g,--guest-port <val>    The port inside of the VM that the host-port connects to
  -p,--host-port <val>     The host port to listen on (assigns dynamically if not specified)
  -l,--host-ip <val>       Listen address (defaults to any)
  -d,--delete              Delete the rule
  --set-name <val>         Rename the rule

❯ anka modify 12.6 port vnc 5900
❯ anka modify 12.6 port ssh 22:0.0.0.0

❯ anka start 12.6

❯ anka show 12.6 network
. . .
port_forwarding_rules:
+------+----------+------------+-----------+
| name | protocol | guest_port | host_port |
+------+----------+------------+-----------+
| ssh | tcp      | 22         | 10000     |
| vnc | tcp      | 5900       | 10001     |
+------+----------+------------+-----------+

❯ ssh anka@localhost -p 10000
(anka@localhost) Password:
Last login: Fri Oct 14 06:37:54 2022
anka@Ankas-Virtual-Machine ~ % 

Changing your VM’s network configuration

Depending on your network topology, there are instances where you might need to use a bridge mode and assign your VM a unique IP address instead of the default shared IP of the host:

> anka modify 14.3.1-arm64 network --help
usage: network [options]

   Modify network card settings

options:
  -t,--mode <val>          network mode: shared/host/bridge/disconnected
  -b,--bridge <val>        host interface name to bridge with in the bridge mode, or "auto"
  -m,--mac <val>           specify fixed MAC address, or "auto"
  -v,--vlan <val>          assign VLAN ID, 0 to deassign
  -c,--controller <val>    set controller: anet, virtio-net
  -f,--filter <val>        filtering rules file to inject on VM start, or embed in VM config (with '-f- < rules.txt'), or use 'off' to disable
TypeDescription
sharedThe default network type operating as NAT + DHCP. Every VM after the start/resume gets an IP address assigned by the internal DHCP server in range 192.168.64.2 - 192.168.64.254. Programs inside a VM can access external networks (outside the host) and the internet directly. Also, other VMs on the host are also accessible.
host
Not currently supported.
bridgeThe Bridged type will cause the VM to show in the network as an individual device and receive a unique IP separate from the host.
An ENV is available to set the interface name: ANKA_BRIDGE_NAME=en0
When using the bridge, port-forwarding is not necessary as the VM will receive a unique IP that will be accessible directly to all other devices on the network.
By default, DHCP will not see your VM’s MAC address. You’ll need to enable --direct-mac for the network-card: anka modify VmName network --mode bridge --direct-mac
disconnectedThe VM will have a disconnected network cable.
natExperimental network mode for Apple Silicon/ARM, allowing ~10x the speed compared to the shared mode. Does not support VM to Host isolation or ARP Spoofing prevention.
❯ anka --machine-readable show 13.1 network | jq '.body'
{
  "mode": "shared",
  "controller": "virtio-net",
  "port_forwarding_rules": [
    {
      "name": "ssh",
      "protocol": "tcp",
      "guest_port": 22
    }
  ]
}

❯ anka modify 13.1 network --mode bridge

❯ anka --machine-readable show 13.1 network | jq '.body.mode'
"bridge"

Modify the hardware UUID and Serial with custom-variable (intel only)

At times you might need to modify the hardware serial or UUID to run proper builds/tests that require specific hardware to function properly:

> sudo anka modify 12.3.1 set custom-variable --help
Usage: anka modify set custom-variable [OPTIONS] KEY VALUE

  Set custom nvram & smb variables (Example: . . . set custom-variable hw.serial "<SERIAL>"

Options:
  --help  Display usage information
sudo anka modify {vmNameOrUUID} set custom-variable hw.uuid "GUID"
sudo anka modify {vmNameOrUUID} set custom-variable hw.serial 'MySerial'

What’s next?